Woodware Sketch Challenge

Use the crafty edger to make this pretty frame for any time of year.

To make the same size as my sample here, cut a piece of card suitable for the

crafty edger to 110mm x 130mm.

You don't need the paper holder from the crafty edger, just the

cassette and the cassette holder.

With the cassette in the holder slide the card into the slot and line up the bottom edge of the card to the cassette edge and punch the bottom right corner.

Flip the card over towards you and punch the bottom right corner. Flip the card over from right to left and punch the bottom right corner again and flip once

more to punch the last corner.

Turn the holder over and insert the card again into the top middle and line up by eye, punch. Repeat with the other side. Hopefully you will have a fantastic frame!

Its important to remember to flip the card each time to create

a mirror effect of the design.

Here I have stamped and white embossed a verse from JGCL551 Christmas Verses.

Use a white pen to hand draw the inner frame and the two doves are punched from 840-09 Christmas set. The tartan ribbon is new to Woodware and would look great with my thistle JGS159!